Auxiliary analog measurement channel programmable to measure other process-related function. Spare digital I/O for performing control or other measurement function.
Versions available for DeviceNet, Ethernet, Profibus.
More about Using Supply Current for Motor Speed Monitoring
• DIN-rail mountable
• 16-bit accurate electrically isolated A/D and D/A channels
• Configurable differential analog input coupling and programmable gain.
• 7 PWM capable industrial rugged digital outputs
• 7 discrete digital inputs (with advanced timing capabilities)
• 100 MIP DSP56303 processor
• Analyzes temporal and spectral characteristics of vibration.
• Performs no-load speed and current testing.
• Several DSP algorithms used to determine motor characteristics.
• Automatically learns motor characteristics.
• Interfaces to PLC or PC.
• More reliable than human ear
• Accurately tracks motor speed during acceleration.
• Direct digital interface to PLC or microprocessor.
• Isolated Analog output indicating speed.
• Contains isolated current transmitter with selectable response time
• Measures signal from 114 RPM to 8195 RPM to within 0.1 %FS.
• Direct interface to PLC or microprocessor.
• Isolated analog output indicating speed.
• Tracks rotation speed by position of rotation rather than frequency. This allows jitter free measurement of average speed of non-symmetrical objects (irregularly spaced input pulses)
Input can be voltage controlled (0-10Volts), current controlled (4-20 mA), or via potentiometer. Full scale output of the device is 1 ampere for the IBPS1, and 1.5 Amperes for the IBPS1.5.
• Outputs 0-10V corresponding to input.
• Both input and output isolated from each other and from supply rails.
• DIN-rail mountable
• Outputs 0-10V corresponding to input.
• Both input and output isolated from each other and from supply rails.
• DIN-rail mountable